LUVM-CMVS R40 Clear Mercury Vapor Spectrum Retrofit Module
Spec Sheet
Installation Instructions

The LUVM-CMVS series retrofit series was designed to replace R40 clear mercury vapor lamps utilized to create moonlight effects. Utilizing a proprietary LED module combining white and colored LEDs, the LUVM-CMVS series is able to re-create the spectral distribution produced by R40 clear mercury vapor lamps. The module can be retrofitted into Techlight R40 bullet fixtures, or it can be installed in new construction installations using existing R40 bullet housings. It's primary usage is to accent lanscape features a greenery, where the application requires a high lumen output.
The LUVM-CMVS retrofit kit consists of a sealed IP68 rated LED module with IP68 rated wireway gland. Die cast heat sink designed to accommodate up to 50W of LED heat. Tempered clear glass lens bonded using Dow Corning mil-spec RTV silicone adhesive sealant. The LUVM-CMVS driver is isolated from the LED heat and is IP66 rated for ingress against water/dust.
Electrical System
Utilizing Cree 2835 LEDs to provide high lumens per watt power consumption between 167-178 lm/W depending on fixture output. Optimized to produce a spectral distribution that matches that of R40 clear mercury vapor lamps. L70 > 100,000 hrs @ 25°C. Includes an NTC foldback circuit which monitors LED temperature on the MCPCB, and will reduce driver output current in the event of high LED thermals caused by ambient temperatures above 40°C, or in the event of debris accumulation on fixture lens. A 10Kv surge protection device is included in module.
The LUVM-CMVS module is retained in the R40 bullet housing by 4/ea stainless steel heat treated spring retainers. The module can be used in all major manufacturers' R40 sized bullet fixtures. It is optimized for Techlight R40 bullets.
Complies with UL8750. Meets US and Canadian safety standards. -40°C to 50°C ambient operation. RoHS compliant. IP66 rated.