Search:   

POLERSPDB RSPDB Round Straight Direct Burial Poles
 

PRICING: Due to the ever-changing economic environment, please consult the factory for pole quotes. ADDITIONAL NOTE: Fixtures and arms must be mounted to the pole before it is erected. Failure to do so may cause the pole to experience the rare, but damaging phenomenon of harmonic vibrations and fatigue. Failure to do so will void the factory warranty.

For Reference Only: The ASCE 7 Hazard Tool is the official source of information for pole selection when identifying wind speed zone limits within North America.

https://asce7hazardtool.online/

Downloads
Wind Zone Map
RSPDB 15 4 11 Spec
RSPDB 20 4 7 Spec
RSPDB 20 4 11 Spec
RSPDB 20 5 7 Spec
RSPDB 20 5 11 Spec
RSPDB 24 5 7 Spec
RSPDB 24 5 11 Spec
Installation Instructions



Pole
The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 46,000 PSI and conforms to ASTM A500 grade C requirements. The shaft construction is a single piece of formed steel welded longitudinally. The hand hole is located 12” above grade A ground lug is provided standard.