CES Small Extruded Canopy

NOTE: High Pressure Sodium lamps are steadily being discontinued and becoming less common. Please consult the factory for availability of High Pressure Sodium models.

Spec Sheet

The CES Canopy light was designed for low level lighting under storefront awnings, or any surface mount general lighting application. The welded seams provide a smooth constructed look that can be integrated into any design concept. This fixture is perfect when a finished, rather than industrial appearance is needed.
The fixture is constructed of .12” thick extruded aluminum with a welded seam. The hinged door frame is constructed of extruded aluminum with mitered corners to fit the glass lens. A Polyethylene Foam gasket is used for a watertight seal.
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request.
Optical System
High quality faceted aluminum reflector designed around a vertical lamp orientation. Flat glass, flat prismatic, and drop lenses available.
Electrical System
Available in 150W, 250W, and 400W pulse start metal halide. Provided with a 4KV pulse rated socket or GX24q socket assembly. Single back side conduit entry. Fixtures are available with a 26W-42W CFL, 50W-175W Metal Halide, and 35W-150W HPS lamp and ballast system. Each 60HZ CWA multi-tap, 480V, or Fluorescent ballast is pre-wired and installed for convenience.
Permanently mounted via four .25” mounting holes and hardware pack provided by Techlight. Two (2) .88” conduit entries are provided.

Please consult factory for availability & pricing of fluorescent & HID fixtures.

Or click picture below to be directed to Internal Directory Page