A linear 6 x 6 fixture for distinctive architectural lighting plans. Ideal for corridors, lobbies, and office areas. The M6 fixture can be installed individually or in continuous rows. It can be mounted in a grid ceiling, a sheetrock ceiling using a flange, surface mounted, or wall mounted. With 50,000 hours of life at L70 standard and a 5-year limited warranty the fixture maintenance cost is reduced substantially over time.

Premium housing crimped along sides for extra rigidity and straight alignment. Can be surface or pendant mounted, individual or in rows. Numerous KO’s for easy installation.

Post painted housing and components with a Lighting White Polyester type paint which has a UV stabilizer included with a 93% reflectivity. Raw steel goes through our custom wash system with a mild solvent and pre-treatment “rust inhibitor” before passing through a preheat oven. After the paint is applied the fixture then passes through the cure oven for maximum adhesion. Each fixture is painted to a minimum of 2-3 mil thickness for extra durability.

Long life LED’s and high efficiency drivers work together to provide superior performance in an efficient package to deliver optimal performance. LED’s available in 3500K, 4000K and 5000K with a CRI >82. Electronic drivers are available in 120/277 volt applications. 0-10V dimming as well as 50% step dimming capabilities come standard. When in the step dimming 50% position the 0-10V leads may still be utitlized for further dimming control.

ETL listed. LM79 and LM80 tested.

The complete luminaire is covered by a 5-year limited warranty.