POLERSPDB RSPDB Round Straight Direct Burial Poles
PRICING: Current Price Guide Available – Subject to Change
ADDITIONAL NOTE: Fixtures and arms must be mounted to the pole before it is erected. Failure to do so may cause the pole to experience the rare, but damaging phenomenon of harmonic vibrations and fatigue. Failure to do so will void the factory warranty.
ADDITIONAL NOTE: Fixtures and arms must be mounted to the pole before it is erected. Failure to do so may cause the pole to experience the rare, but damaging phenomenon of harmonic vibrations and fatigue. Failure to do so will void the factory warranty.
Downloads
Wind Zone Map
RSPDB 15 4 11 Spec
RSPDB 20 4 7 Spec
RSPDB 20 4 11 Spec
RSPDB 20 5 7 Spec
RSPDB 20 5 11 Spec
RSPDB 24 5 7 Spec
RSPDB 24 5 11 Spec
Installation Instructions
Pole
The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 46,000 PSI and conforms to ASTM A500 grade C requirements. The shaft construction is a single piece of formed steel welded longitudinally. The hand hole is located 12” above grade A ground lug is provided standard.
