The CEL Canopy light was designed for mid to high level lighting under storefront awnings, or any surface mount general lighting application. The welded seams provide a smooth constructed look that can be integrated into any design concept. This fixture is perfect when a finished, rather than industrial appearance is needed.

The fixture is constructed of .12” thick extruded aluminum with a welded seam. The hinged door frame is constructed of extruded aluminum with mitered corners to fit the glass lens. A Polyethylene Foam gasket is used for a watertight seal.

A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request.

High quality faceted aluminum reflector. Flat glass, flat prismatic, and drop lenses available. Lamps burn in horizontal position.

Provided with a 4KV pulse rated socket assembly. Fixtures are available with a 250W-400W Metal Halide, and 250W-400W HPS lamp and ballast system. Each 60HZ CWA multi-tap, 480V, or Fluorescent ballast is pre-wired and installed for convenience.

Permanently mounted via four .25” mounting holes and hardware pack provided by Techlight. Two (2) .88” conduit entries are provided.