L2PCS LED Petroleum Canopy-Scottsdale Retrofit
Application
The high performance luminaire is designed for petroleum
station canopy applications where long life, low maintenance, and consistent
color rendering is required. All areas with limited accessibility due to fixture
location or where heavy pedestrian or vehicle traffic makes maintenance difficult
are ideal applications such for this fixture.
Construction
The heavy duty housing is constructed of cast aluminum.
The optical assemblies are sealed in place using a silicone gasket for
weather tight protection.
Finish
A Super Durable Polyester powder coat finish is electrostatically
applied in our state of the art paint facility. Standard colors available: White.
Custom colors available upon request.
Optical System
Light is directed through a clear, flat tempered glass
lens providing a uniform and symmetrical light pattern.
Electrical System
Available in 5000K Cool White (+/- 150K) color
temperatures propagated with Philips Lumileds LUXEON® 3030 LED’s. Minimum
80 CRI. Available with 90-300V 50/60 Hz Class II power supply. LED’s
rated over 50,000 hours (TM21 Calculated L70) at 25°C ambient temperature
with available 1400mA operation. Lumen Maintenance >97% at 50K
hrs. 347V and 480V input options available. Standard 0-10V dimming. Driver
provided with integral 4kV surge protection that meets IEEE C62.42.2-2002.
Optional 10kV Surge Suppressor available (see accessories). Built-in Active
PFC Function. LED Power Supply conforms to UL1310 Class 2 and UL8750
standards and is IP67 rated for wet locations.
Mounting
The fixture is easily installed by one person. It may be mounted
into a 12” or 16” deck pan. Nominal 1” hole deck penetration needed
for new installation. Driver assembly retrofits into existing Scottsdale® ballast
enclosure once existing HID ballast is removed.
Listings
ETL listed for wet locations (IP64). Meets US and Canadian
safety standards. -40°C to 40°C ambient operation. RoHS Compliant.