Search:   

TIHB LED Indirect High Bay
 
Downloads
Specification Sheet



Application
The high lumen output luminaire is designed to be a replacement for HID and fluorescent high bays. It is optimal for lighting applications where long life, low maintenance, and consistent color rendering is required. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult are ideal applications. The high wattage/lumen output allows the fixture to be used for warehouse, manufacturing and big box retail applications.
Construction
The robust housing is constructed of code-gauge (22 gauge) cold rolled steel. Rigid stiffening brackets prevent twisting and bowing. Engineered for exceptional thermal performance using lightweight aluminum thermal LED heat sinks. Open structure design allows for natural convective cooling. Optional End Caps are available. Wireguard attachment points provided.
Finish
Post painted housing and components with a Lighting White Polyester type paint which has a UV stabilizer included with a 93% reflectivity. Raw steel goes through our custom wash system with a mild solvent and pre-treatment “rust inhibitor” before passing through a preheat oven. After the paint is applied the fixture then passes through the cure oven for maximum adhesion. Each fixture is painted to a minimum of 2-3 mil thickness for extra durability.
Optical System
High efficiency linear LED strips provide a medium light distribution pattern and exceptional horizontal and vertical performance.
Electrical System
Class II long life LED’s and high efficiency drivers work together to provide superior performance in a safe and efficient package. 10 light levels provide a wide range of output options, 700mA long-life/high efficiency and 1400mA high ouput driver operation.. L95 at 10K hours L70 ≥ 50K hours. LED’s available in 4000K and 5000K with a CRI >80.Electronic drivers are available in 120~277V or 347~480V configurations. Power factor >0.9, 0-10V dimming standard (dimming leads pulled through upon request). Modular wiring drop cord may be factory installed (contact your sales representative for details).
Mounting
Suitable for suspension mounting via aircraft cables, jack chain with “S” hooks, end-mount tong hangers; monopoint mounting via a ½” rigid or swivel pendant system; or surface mounted directly to a standard junction box. NOTE: Pendant and surface mount applications require the PSMA mounting accessory.
Listings
Class II compliant. Complies with UL8750. ETL listed for damp locations. Meets US and Canadian safety standards. -40°C to 50°C ambient operation. RoHS Compliant.